Lightdot Remote Control for LED High Bay Light with Motion Sensor

Remote Control for High Bay Light with Motion Sensor

This remote control is a special match with high bay light with motion sensor, but the battery is not included.

Detection Area & Hold Time: - Set the detection area to 25%, 50%, 75%, or 100%. The maximum diameter is 8 meters. - Set the hold time to 5 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, 20 minutes, or 30 minutes.

Multi-Function Press Buttons: - Press the "ON/OFF" button to put the light in constant on/off mode, disabling the sensor. - Press the "Reset" button to restore all parameters to their default settings. - Press the "Sensor Motion" button to exit the constant on/off mode and reactivate the sensor (the latest settings will remain valid).

Setting Sensitivity: - Press the "HS" button to set the detection area to high sensitivity. - Press the "LS" button to set the detection area to low sensitivity. - The adjustment is based on the "Detection Area" parameter you have set.

QS1, QS2, QS3, and TEST 2S: - The detection area, hold time, and daylight sensor can be adjusted by pressing the corresponding button. - The latest setting will remain valid. - Under any status, press the "TEST 2S" button to enter the test mode, where the detection area is set to 100%, the hold time is set to 5 seconds, and the daylight sensor is disabled. - This test mode is for testing purposes only. To exit this mode, press the "RESET" button or any other function button.

product information: